Gypsum board partitions are commonly used because they are inexpensive and functional in dividing up huge rooms into smaller ones. Gypsum boards, commonly called drywall or plasterboard, are advantageous because of their fireproofing, lightweight, and adaptability. When constructing walls for an office, a study, or a walk-in closet, gypsum boards are a practical and visually beautiful option. In this article, we’ll take a detailed look at Methods for partitioning a room with gypsum boards (วิธีกั้นห้องด้วยแผ่นยิปซั่ม, which is the term in Thai).
Preparation And Layout
Carefully plan and design the room partition’s arrangement before beginning any construction. Think about what the partition will be used for, how big you want it to be, and whether or not you want any windows or doors in it. First, you should measure the space precisely so that you can create a detailed plan on paper or in a design program.
Collect Necessary Items
You’ll need the following items and equipment to successfully gypsum-board-partition a room:
- Standard gypsum boards or moisture-resistant gypsum boards
- The gypsum boards can be hung from metal or wooden studs.
- Nails or screws to secure the drywall to the studs.
- Tape and joint compound to seal the joints
- Beading in the corners (to make the edges crisp and sturdy)
- Knife, tape measure, and level
- Tools: screwdriver or drill
- Drywall saw (used for reducing the size of sheets of drywall)
- Protective gear including goggles and gloves
Putting Up The Backbone:
Building a framework that can hold the gypsum boards in place is the first stage. Both metal and wooden studs can be used. Metal studs are the best option for wet environments like bathrooms and kitchens since they are durable, lightweight, and easy to work with. Wooden studs are increasingly common because of their lower cost and widespread use for interior walls.
Affix Tape And Joint Compound
A joint compound is used to fill the spaces between the gypsum boards and hide the screw or nail heads once they have been put. The seams can be strengthened and a seamless appearance achieved by applying joint tape over them. Wait until the joint compound is totally dry before proceeding.
Close The Adjacent Walls
Corner beads installed along the partition’s edges create smooth, long-lasting corners. Corner beads, typically made of metal or plastic, are placed over the corners to prevent damage and add a finished look. Apply joint compound to the corners to keep the beads in place.