Introduction
You will need 2 sumps. The Primary Sump Pump and Battery Backup Sump Pump. The purpose of having two sump pumps is to provide a backup in case the first one fails or your home’s electricity goes out. If you use a whole-house generator, you may now replace the battery backup with a supplementary Primary Sump Pump. At that time, your electricity is alright, and the problem is having another pump on hand for when, rather than if, the main one fails. Because, as is always the case, these events do not continue indefinitely.
Placing Of Sump Pumps
To understand why Sump Pits are necessary, you need to first comprehend how a Drain Tile is placed. To summarize, the Drain Tile should be slanted 1/8″ on each linear foot. An additional Sump Pit is required if the perimeter of your basement reaches 160 linear feet. This is because the Drain Tile is going to end up beneath your home’s foundation footing at that time. The soil beneath the footing could run out through the Drain Tile, creating structural harm to your property. Find more about Zoeller M53 submersible sump pump
Knowing About The Working Of Sump Pumps
- A sump pump’s primary function is to stop flooding and damage from water in a basement or other lower floors of a building.
- Drains or the soil near the foundation allow water to enter the sump pit. The water is gathered in the pit and held there until it satisfies a specified level.
- The majority of sump pumps come with a pressure sensor or float switch. The float rises or the pressure sensor is activated, which activates the pump, when the water’s level in the pit reaches a specified level.
- An impeller within the pump starts spinning quickly as soon as the sump pump is turned on. The water is forced into a discharge pipe as a result of the centrifugal force created.
- The water is pushed via the discharge pipe and away from the foundation of the structure, into the storm drain or a dry well, or another authorized drainage location.
- The floating switch or pressure gauge will cause the pump to shut off if the liquid level within the sump pit drops below a specific level.
Need Of A Secondary Sump Pump
Sump pumps may stop working because of mechanical problems, electrical problems, or float switch difficulties. If your primary sump pump breaks down, having a backup pump gives you a backup plan of action. A backup pump can maintain the sump pit functioning while the primary pump needs maintenance or repairs, reducing the risk of flooding during the period of inactivity. When the main pump breaks down or when the levels of water increase over a specific level, a few backup sump pumps have alarm systems that notify the homeowner. It’s crucial to get a trustworthy, excellent secondary sump pump that matches your unique requirements and works in tandem with the main sump pump.
